收藏本站
LTC2207-14/LTC2206-14
16
220714614fc
OPERATION
DYNAMIC PERFORMANCE
Signal-to-Noise Plus Distortion Ratio
The signal-to-noise plus distortion ratio [S/(N+D)] is the
ratio between the RMS amplitude of the fundamental input
frequency and the RMS amplitude of all other frequency
components at the ADC output. The output is band lim-
ited to frequencies above DC to below half the sampling
frequency.
Signal-to-Noise Ratio
The signal-to-noise (SNR) is the ratio between the RMS
amplitude of the fundamental input frequency and the RMS
amplitude of all other frequency components, except the
rst ve harmonics.
Total Harmonic Distortion
Total harmonic distortion is the ratio of the RMS sum
of all harmonics of the input signal to the fundamental
itself. The out-of-band harmonics alias into the frequency
band between DC and half the sampling frequency. THD
is expressed as:
THD = –20Log (
√(V
2
2 + V32 + V42 + ... VN2)/V1)
where V1 is the RMS amplitude of the fundamental fre-
quency and V2 through VN are the amplitudes of the second
through nth harmonics.
Intermodulation Distortion
If the ADC input signal consists of more than one spectral
component, the ADC transfer function nonlinearity can
produce intermodulation distortion (IMD) in addition to
THD. IMD is the change in one sinusoidal input caused
by the presence of another sinusoidal input at a different
frequency.
If two pure sine waves of frequencies fa and fb are applied
to the ADC input, nonlinearities in the ADC transfer function
can create distortion products at the sum and difference
frequencies of mfa ± nfb, where m and n = 0, 1, 2, 3, etc.
For example, the 3rd order IMD terms include (2fa + fb),
(fa + 2fb), (2fa – fb) and (fa – 2fb). The 3rd order IMD is
dened as the ratio of the RMS value of either input tone
to the RMS value of the largest 3rd order IMD product.
Spurious Free Dynamic Range (SFDR)
The ratio of the RMS input signal amplitude to the RMS
value of the peak spurious spectral component expressed
in dBc. SFDR may also be calculated relative to full scale
and expressed in dBFS.
Full Power Bandwidth
The full power bandwidth is that input frequency at which
the amplitude of the reconstructed fundamental is reduced
by 3dB for a full scale input signal.
Aperture Delay Time
The time from when a rising ENC+ equals the ENC– voltage
to the instant that the input signal is held by the sample-
and-hold circuit.
Aperture Delay Jitter
The variation in the aperture delay time from conversion
to conversion. This random variation will result in noise
when sampling an AC input. The signal to noise ratio due
to the jitter alone will be:
SNRJITTER = –20log (2
π f
IN tJITTER)
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
LTC2220IUP-1#TRPBF IC ADC 12BIT 185MSPS 64-QFN
LTC2221IUP#TRPBF IC ADC 12-BIT 135MSPS 64-QFN
LTC2222IUK-11#TRPBF IC ADC 11BIT 105MSPS SAMPL 48QFN
LTC2223IUK#TRPBF IC ADC 12BIT 80MSPS SAMPLE 48QFN
LTC2224IUK#TRPBF IC ADC 12BIT 135MSPS SAMPL 48QFN
LTC2225IUH#TRPBF IC ADC 12BIT 10MSPS 3V 32-QFN
LTC2228IUH#TRPBF IC ADC 12BIT 65MSPS SAMPL 32-QFN
LTC2229IUH#PBF IC ADC 12-BIT 80MSPS 3V 32-QFN
相关代理商/技术参数
LTC2207IUK-14#TRPBF 功能描述:IC ADC 14BIT 105MSPS 48-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极
LTC2207UK 制造商:LINER 制造商全称:Linear Technology 功能描述:16-Bit, 105Msps/80Msps ADCs
LTC2207UK-14 制造商:LINER 制造商全称:Linear Technology 功能描述:14-Bit, 105Msps/80Msps ADCs
LTC2208 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual 14-Bit 250Msps
LTC2208-14 制造商:LINER 制造商全称:Linear Technology 功能描述:14-Bit, 130Msps ADC
LTC2208CUP 制造商:Linear Technology 功能描述:IC ADC 16BIT 130MSPS 64-QFN
LTC2208CUP#PBF 制造商:Linear Technology 功能描述:Single ADC Pipelined 130Msps 16-bit Parallel/LVDS 64-Pin QFN EP Cut Tape 制造商:Linear Technology 功能描述:IC ADC 16BIT 130MSPS 64-QFN 制造商:Linear Technology 功能描述:ADC 16BIT 3.3VIN 130MSPS 64QFN 制造商:Linear Technology 功能描述:ADC, 16BIT, 3.3VIN, 130MSPS, 64QFN 制造商:Linear Technology 功能描述:MS-ADC/High Speed, 16-bit, 130Msps ADC 制造商:Linear Technology 功能描述:IC, ADC, 16BIT, 130MSPS, QFN-64, Resolution (Bits):16bit, Sampling Rate:130MSPS, Supply Voltage Type:Single, Supply Voltage Min:3.135V, Supply Voltage Max:3.465V, Supply Current:380mA, Digital IC Case Style:QFN, No. of Pins:64 , RoHS Compliant: Yes
LTC2208CUP#PBF 制造商:Linear Technology 功能描述:IC ADC 16BIT 130MSPS QFN-64